1 x Smok RPM80 Pro Device

1 x Smok RGC Pod (For RGC Coils)

1 x Spare Smok RPM Pod (For RPM Coils)

1 x 0.17 Ohm RGC Conical Mesh 0.17ohm Coil (for RGC Pod)

1 x 0.6ohm Nord Coil (For RPM Pod)

1 x USB Lead

1 x User Manual

The RPM80 Pro Pod Kit is compatible with two different pod types and in-turn various coils

The RPM Pod is handily compatible with all existing RPM coils.

The RPM80 RGC Pod can be used with the new RGC Conical Mesh 0.17Ω coil.

The RPM 80 RPM POD uses the Smok RPM Coils which are available in 1.0 Ohm for Mouth to Lung vaping and a similar draw to a cigarette. You would need to set your device to a maximum of 15w

Or the Smok RPM Coils in 0.4 Ohm for an intermediate sub ohm vaping experience with more clouds, vapor and flavour. When using these coils set your device to a maximum 25W

The RGC Conical Mesh Coil in 0.17Ohms is a low resistance coil that uses a conical mesh design funneling airflow up through the coil for more intense flavour. Rated at up to 80 watts of power, this coil is capable of serious performance and clouds. For best results set your device between 40W - 80W

If you're using the Smok RPM Coils in 1.0 Ohm rating we recommend using nic salts, why not try our Primal Asalted range 

For the Smok RPM Coils in 0.4 Ohm  we would recommend any liquid that's at least 60%VG/40%PG. When sub-ohm vaping with lower resistance coils, we would recommend using e-liquids with a nicotine strength no higher than 3mg as the effect of higher nicotine can be a bit harsh on the throat. Why not try a high VG shortfill which can be mixed up to 3mg nicotine strength.

If you are using the Smok RPM Coils in 0.4Ohm and would still like a higher nicotine strength we would recommend a High VG 10ml Liquid  to avoid the device leaking. These are available in higher nicotine strengths, but please note that these may be quite strong when sub-ohm vaping. 

For RGC Conical Mesh Coil in 0.17Ohms we would simply recommend a high VG shortfill why not try our Primal shortfill range?

Battery Capacity: One single 18650 battery   (Sold Separately) 

E-Juice Capacity: 2ml

Firing Time: 0.001S

Output Wattage: 1W-80W

Output Mode: Watt

Resistance Range: 0.2ohm - 2.5ohm

Dimensions: 118 x 26 x 31.5 mm

Weight: 125g

Output power: 1-80 watts

Adjustable airflow

Resistance range: 0.15-3.00Ω

Battery compatibility: 18650

Stand by current: <100uA

Output voltage: 0.5V-4.0V

Input voltage: 3.3V-4.2V

Charging voltage: 5V

Charger output: 5V/2A

Over discharge voltage: 2.4V

Charging current: 1.2A (Max)

Overcharge voltage: 4.3V

E-liquid capacity: 2ml

Intelligent atomiser recognition

Puff monitoring system

8 seconds cut-off

Short circuit protection

Overheating protection

Low battery warning

The maximum output power is 80W, which is powered by 1 x 18650 external batteries (sold separately)

You will be able to see the current battery levels of your RPM80 Pro Kit on the digital Full Colour Display screen on the front of the device. 

This is a top filling pod device so there is no need to remove the pod to fill with e-liquid

Pull out the rubber plug on the slot and add e-liquid through the slot

Press the rubber plug back carefully and firmly

1 x Smok RPM80 Pro Device

1 x Smok RGC Pod (For RGC Coils)

1 x Spare Smok RPM Pod (For RPM Coils)

1 x 0.17 Ohm RGC Conical Mesh 0.17ohm Coil (for RGC Pod)

1 x 0.6ohm Nord Coil (For RPM Pod)

1 x USB Lead

1 x User Manual

The RPM80 Pro Pod Kit is compatible with two different pod types and in-turn various coils

The RPM Pod is handily compatible with all existing RPM coils.

The RPM80 RGC Pod can be used with the new RGC Conical Mesh 0.17Ω coil.

The RPM 80 RPM POD uses the Smok RPM Coils which are available in 1.0 Ohm for Mouth to Lung vaping and a similar draw to a cigarette. You would need to set your device to a maximum of 15w

Or the Smok RPM Coils in 0.4 Ohm for an intermediate sub ohm vaping experience with more clouds, vapor and flavour. When using these coils set your device to a maximum 25W

The RGC Conical Mesh Coil in 0.17Ohms is a low resistance coil that uses a conical mesh design funneling airflow up through the coil for more intense flavour. Rated at up to 80 watts of power, this coil is capable of serious performance and clouds. For best results set your device between 40W - 80W

If you're using the Smok RPM Coils in 1.0 Ohm rating we recommend using nic salts, why not try our Primal Asalted range 

For the Smok RPM Coils in 0.4 Ohm  we would recommend any liquid that's at least 60%VG/40%PG. When sub-ohm vaping with lower resistance coils, we would recommend using e-liquids with a nicotine strength no higher than 3mg as the effect of higher nicotine can be a bit harsh on the throat. Why not try a high VG shortfill which can be mixed up to 3mg nicotine strength.

If you are using the Smok RPM Coils in 0.4Ohm and would still like a higher nicotine strength we would recommend a High VG 10ml Liquid  to avoid the device leaking. These are available in higher nicotine strengths, but please note that these may be quite strong when sub-ohm vaping. 

For RGC Conical Mesh Coil in 0.17Ohms we would simply recommend a high VG shortfill why not try our Primal shortfill range?

Battery Capacity: One single 18650 battery   (Sold Separately) 

E-Juice Capacity: 2ml

Firing Time: 0.001S

Output Wattage: 1W-80W

Output Mode: Watt

Resistance Range: 0.2ohm - 2.5ohm

Dimensions: 118 x 26 x 31.5 mm

Weight: 125g

Output power: 1-80 watts

Adjustable airflow

Resistance range: 0.15-3.00Ω

Battery compatibility: 18650

Stand by current: <100uA

Output voltage: 0.5V-4.0V

Input voltage: 3.3V-4.2V

Charging voltage: 5V

Charger output: 5V/2A

Over discharge voltage: 2.4V

Charging current: 1.2A (Max)

Overcharge voltage: 4.3V

E-liquid capacity: 2ml

Intelligent atomiser recognition

Puff monitoring system

8 seconds cut-off

Short circuit protection

Overheating protection

Low battery warning

The maximum output power is 80W, which is powered by 1 x 18650 external batteries (sold separately)

You will be able to see the current battery levels of your RPM80 Pro Kit on the digital Full Colour Display screen on the front of the device. 

This is a top filling pod device so there is no need to remove the pod to fill with e-liquid

Pull out the rubber plug on the slot and add e-liquid through the slot

Press the rubber plug back carefully and firmly